- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
| PDF Export | |
190-09
SENTAI
190-09
Variances in color, graphic, surface, texture and structure is typical and is not considered a defect. While placing items over the floor with high static pressure load, weight distribution must be done
according to the load distribution place.Protection and Maintenance of Your floor Furniture should be moved onto the newly installed floor using an appliance hand truck over hardboard runways. Oil or petroleum-based products can result in surface staining. Do not track asphalt-driveway sealer or automobile-oil drips onto the SPC floor.Caster wheeled chairs should have wide, rubber casters. Protective mats are required under office chairs.Use non-staining mats. Rubber may discolor the floor.Frequently moved furniture should be equipped with felt pads to avoid scratching the floor. Heavy furniture and appliances should be equipped with non-staining large surface floor protectors. Furniture with castors or wheels must be easy swiveling, large surface non-staining and suitable for resilient floors. Do not use ball type castors as they can damage the floor.Use walk off mats at entrances to prevent dirt and grit from being tracked on to the floor.Installation TypeThe SPC flooring is integrated with a sound insulation layer in its construction. The bottom of each plank is fitted with IXPE sound insulation pads, so no additional sound insulation is required and the floor can be installed directly on the ground as a floating system. Floating flooring system is a flooring system that does not require sticking to the bottom
layer.
Require tools
A ruler, pencil, speed ruler, utility knife or lever cutter,
rubber floor hammer, if necessary, punch saw, gasket wedge and
a clapper block.
Subfloor Prep / C onditions (DIN 18365 paragraph 3)
The bottom layer must be free of old textile coverings, clean,
permanently dry, uniform, firm and stable.
Variances in color, graphic, surface, texture and structure is typical and is not considered a defect. While placing items over the floor with high static pressure load, weight distribution must be done
according to the load distribution place.Protection and Maintenance of Your floor Furniture should be moved onto the newly installed floor using an appliance hand truck over hardboard runways. Oil or petroleum-based products can result in surface staining. Do not track asphalt-driveway sealer or automobile-oil drips onto the SPC floor.Caster wheeled chairs should have wide, rubber casters. Protective mats are required under office chairs.Use non-staining mats. Rubber may discolor the floor.Frequently moved furniture should be equipped with felt pads to avoid scratching the floor. Heavy furniture and appliances should be equipped with non-staining large surface floor protectors. Furniture with castors or wheels must be easy swiveling, large surface non-staining and suitable for resilient floors. Do not use ball type castors as they can damage the floor.Use walk off mats at entrances to prevent dirt and grit from being tracked on to the floor.Installation TypeThe SPC flooring is integrated with a sound insulation layer in its construction. The bottom of each plank is fitted with IXPE sound insulation pads, so no additional sound insulation is required and the floor can be installed directly on the ground as a floating system. Floating flooring system is a flooring system that does not require sticking to the bottom
layer.
Require tools
A ruler, pencil, speed ruler, utility knife or lever cutter,
rubber floor hammer, if necessary, punch saw, gasket wedge and
a clapper block.
Subfloor Prep / C onditions (DIN 18365 paragraph 3)
The bottom layer must be free of old textile coverings, clean,
permanently dry, uniform, firm and stable.
