sentai spc floor super protect 5mm 6mm 7mm click spc pvc plastic vinyl flooring laminate waterproof 1036-2

1. Green environmental protection

SPC Vinyl Flooring

Stone plastic composite vinyl flooring is considered to be an upgraded version of engineered vinyl flooring. This core is made

from a combination of natural limestone powder, polyvinyl chloride, and stabilizers. This provides an incredibly stable base for

each flooring plank.

The main raw material of SPC floor is polyvinyl chloride. Polyvinyl chloride (PVC) is a non-toxic and renewable resource. It has been widely used in people's daily life, such as tableware, medical infusion tube bag, etc. its environmental protection is not to worry about. SPC floor (sheet) is mainly composed of natural stone powder, which does not contain any radioactive elements, and is a new green and environmental protection floor decoration material.

2. Ultra light and ultra thin

The thickness of SPC floor is 3.2mm-12mm, and the weight per square meter is only about 2-7.5kg, which is less than 10% of the common floor materials. In high-rise buildings, SPC floor has incomparable advantages in building load-bearing and space saving. At the same time, it has special advantages in secondary decoration and transformation.

3. Super wear resistance

SPC floor surface has a special transparent wear-resistant layer processed by high-tech, and its wear-resistant revolution can reach more than 8000 revolutions. In the traditional floor materials, the wear-resistant laminate floor has only 800-4000 revolutions.

Product Name	China Factory Good Quality Indoor Customizable Spc Floor	Style	Modern / American / French / European / classical / postmodern etc
Brand	sentai spc ezlife	Colour	Various colors can be customized
Texture	Stone pattern flooring	Place of Product	Anhui Province,China
click	floor/wall 2G/3L/5G/5GI..	Modes of packing	Packed in three cartons
Size	305*610 940*470 1280*181 1520*228 1830*228 305*610 940*470 1280*181 1520*228 1830*228	After sale service	5-year warranty

Warranty:More than 5 years   After sale:Online technical support  Onsite Inspection

Application scenario: Indoor  

Origin: Anhui , China  

Brand: Sentai ezllife 3dtex

Surface treatment: UV coating

Minimum order quantity:2500㎡

Supply capacity: 500000 m2 / month

Packaging method: tray + packaging (customizable)

The first cooperation sample is free (express fee is required), the second cooperation sample is free and the express fee is free。

Product size：122*18.1*3.5-8.5    

It can customize size, appearance, packaging, design and sales materials。

Spc floor click：valinge  i4f

Require tools

A ruler, pencil, speed ruler, utility knife or lever cutter,

rubber floor hammer, if necessary, punch saw, gasket wedge and

a clapper block.

Subfloor Prep / C onditions (DIN 18365 paragraph 3)

The bottom layer must be free of old textile coverings, clean,

permanently dry, uniform, firm and stable.

Loose, soft or elastic old coverings must be removed. The flatness must conform to line 4 of table 3 of DIN 18202 and shall not exceed 2mm/ m. Any bumps must be removed and the pits filled in.The following maximum moisture content is applicable to new buildings or floor slabs:For floor heating, the maximum allowable heat output is 55W /m and must be evenly distributed throughout the area.The surface temperature of the slab shall not exceed 29℃ during heating.Installatio

Install the first board with the spring facing the wall. Then, wrap the second piece of wood from the front to the first piece.

The final element of the series will be shortened: cut the decorative side with a utility knife, then bend and break the board.Make sure that the first track is perfectly laid straight and that a distance of 10 mm with the wall wedge is ensured while ensuring that the same allowance is applied to both ends / sides.Following lines:18  19 Offsets between two adjacent lines at both ends must be at least 40cm or 1/2 board length. If the rest doesn't fit, simply start it at the beginning of the next line and use the matching New Cut.Insert the starting section into the long side of the row already in place, gently lock it up and fold. The next element also permeates the long side first and is properly locked when the head ends are folded.