sentai spc floor natural oak wpc indoor flooring art parquet 196-06

Ezlife

BIO Composite Wood  Real water resistant engineered Veneer flooring Finished Paint Structural  Analysis Primer Paint  Balancing Veneer (optional)  SENTAI BIO composite wood floor is the next generation of engineered veneer flooring. It combines the natural beauty and richness of real wood with a

patented construction of BIO composite core.  Unique benefits of  BIO Composite Wood   Advantage of BIO Composite Wood  Water-resistant  100% Waterproof and extremely stable when exposed to great temperature variations eco friendly  Sentai BIO Composite Wood flooring is manufactured greatly

decreases our overall carbon emissions. This benefit to the environment offers real peace of mind for our customers.SPC Installation and Maintenance Instructions Sentai SPC flooring is based on a very unique formulation which combines the advantage of stone and virgin PVC. Please read this installation guide carefully before installation & maintenance. Installation tools Tape measure, Tapping block, Hammer, Pencil, Pry bar or pull bar, Chalk line, Wood or plastic spacers(6-8mm), Crosscut power saw or knife, 3M Blue Tape. Acceptable subfloor types  Sentai SPC Flooring is a durable and easy to maintain floor covering choice for both residential and commercial applications. Due to its slim & stable structure, it is suitable for both new construction and renovation projects. It can be even installed in lounges and high humidity  environments such as bathrooms, kitchens or cellars. Pre-installation subfloor Requirements

Although Sentai SPC floor is water proof, it is not a moisture barrier. It is still good to make sure concrete is cured and subfloor is dry and structurally sound. Make sure the subfloor is thoroughly swept and free of all debris. And flat level to 0.5cm per 30 square meter. SPC Flooring is suitable for underfloor heating systems using hot water but radiant or electrical underfloor heating is prohibited.The site where the

product to be installed, should be maintained at least 18 °C, and shall not exceed 30°C. If the SPC Flooring itself is stored in a facility within the same range of the temperatures mentioned above prior to purchasing, no acclimation is required for SPC Flooring itself prior to installation. Room temperatures of 20-22°C and a relative humidity in the range of 35-65% are optimal and recommended after the installation is completed.