Selection of 3d nonpvc flooring

3d nonpvc flooring, in simple terms, refers to the flooring laying process, which can be completely nail-free, glue-free, keel-free, and directly laid on the ground floor. PVC self-adhesive flooring is in the original back of the floor, coated with non-drying glue, and then use PE release film to cover the glue protection. Tear off the release film when installing the floor, you can realize the convenient and quick installation of the floor.

Here is the content:

l Look at the appearance

l Touch feel

l See the light transmittance

l See the thickness

l Abrasion resistance and water resistance

Look at the appearance

Selection should observe the floor surface in detail, if the floor surface is without obvious color spots, relatively flat, and the pattern is also relatively clear, then it belongs to the quality products. If the surface of the floor is not flat, there are obvious color spots, the pattern is not clear, while the fit and flatness after laying are poor, it belongs to poor quality products, it is not recommended to buy.

Touch feel

Touch the surface of the floor carefully with your hand, if it gives a sense of moisture, it represents the SPC floor belongs to high-quality products. The inferior 3d flooring is generally made of mixed materials and recycled materials, when touched by hand, it will feel dry, with no sense of moisture.

See the light transmittance

High-quality 3d flooring is suspended in the air, and then shines a flashlight on it below towards the top so that the light seen is brighter, it represents the SPC flooring light transmission is better and belongs to the quality products, and vice versa, it is inferior products.

See the thickness

Measure the actual thickness of 3d nonpvc flooring with a ruler, and then compare it with the thickness prescribed by our country, if the country stipulates four millimeters, but the actual measurement is only about 3.7 millimeters, it means that SPC flooring belongs to inferior products, if the actual thickness will be thicker than the prescribed thickness of about 0.2 millimeters, it generally belongs to high-quality products.

Abrasion resistance and water resistance

Some inferior 3d flooring is only surface coating treatment. This also leads to wear resistance performance being still relatively poor.

There is also to see whether it has the performance of waterproof. Although some floors have floor surface coating that is also waterproof, the stubble between the wooden floor and the wooden floor is not waterproof, there will be water poured in, and the wooden floor is scrapped. And the whole surface of the good floor is processed by a special process, the water is not infiltrated.

From the end of zo16, 3d nonpvc flooring became popular in the interior flooring industry, and Sentai seized this opportunity to become one of the pioneers of SPC flooring production worldwide. Now Sentai Flooring is recognized as a well-known flooring manufacturer after 5 years of development. In the past 3 years, through close cooperation with our partners, Sentai Flooring has continued to grow rapidly. If you are interested in our products, please feel free to contact us for more information. We look forward to establishing long-term business relationships with customers from all over the world.