Installation precautions for digital printing flooring

Sentai digital printing flooring is based on a very unique formula that combines the strengths of stone and raw digital printing flooring. Before installation and maintenance, let's take a look at the precautions.

Here is the content list:

l Preparation before installation of digital printing flooring

l Installation ideas for digital printing flooring.

Preparation before installation of digital printing flooring

Digital printing wood flooring is suitable for floor heating systems using hot water, but radiant or electric floor heating is prohibited. The part where the product is installed should be kept at least 18°C and should not exceed 30°C. If the digital printing flooring itself is stored in a facility within the above temperature range before purchase, there is no need to adapt the digital printing flooring itself before installation. A room temperature of 20-22°C and relative humidity in the range of 35-65% are optimal and are recommended after installation. With underfloor heating, these values are already achieved at a surface temperature of 24°C. Especially in winter, special attention should be paid to humidity and, if necessary, should be raised to the recommended measures.

Installation ideas for digital printing flooring.

To prevent edge damage and to prevent bending of the digital printing flooring, the box should not be placed or carried with the narrow side down, but should only be transported and stored on a flat and stable surface with the longer side of the box on the floor. In environments without strong direct sunlight, floors without expansion joints can be installed up to a maximum length of 20 meters. For larger areas or more complex layouts such as L-, Z- or U-shaped, "hourglass", retracted, doorways, and/or if heavy or permanently installed structures impede the free movement of floating units, the floor must be telescopic Sew apart in place. Floors are not suitable for areas with dynamic horizontal forces, such as those found in gyms, sports, and dance floors. If there are any expansion joints in the frosted layer, they should be leveled. At transitions, there must be a 10mm gap between digital printing flooring and any other floor coverings, all fixtures, door frames, and walls. If any wood framing or current skirting is present on site, the digital printing flooring must be slid by opening the notch at the bottom of the structure. All wedges should be removed and openings covered with suitable trim such as baseboards, transition rails, and rosette tubes. Floating installations require the floor in the doorway to be separated by louvers. Adjacent surfaces with extreme temperature differences should be separated if necessary. Intense direct sunlight can cause thermal expansion. Suitable shading measures prevent overheating. The box can only be opened immediately before installation. Always mix planks randomly from multiple boxes. Before installation, inspect individual elements for any defects, such as color structure, and possible physical damage in a good lighting environment. When placing items on floors with high hydrostatic loads, weight must be distributed according to the location of the load distribution.

Our official website is https://www.sentaifloor.cn/. If you work related to Digital printing flooring or want to know more about our company, you can communicate with us on the website. Our cost-effective products are well received by everyone.