Cleaning and maintenance of digital printing flooring

The main component of digital printing flooring is polyvinyl chloride material, which can be made into two kinds, one is homogeneous and transparent, that is, the pattern material from the bottom to the surface is the same. There is also a composite type, that is, the upper layer is a pure PVC transparent layer, and a printing layer and a foam layer are added below. The diversity of digital printing flooring makes it widely used in all aspects of home and business.

Here is the content list:

l Cleaning of digital printing floors

l Maintenance of Digital printing flooring

Cleaning of digital printing floors

The cleaning of digital printing flooring is divided into five steps. Start by removing dust and grime from the digital printing wood flooring. Use dry or damp yarn, microfiber, or another available dry mop. Then use a vacuum cleaner to remove dust and loose dirt from the digital printing floor. This cleaning method can be used in place of a mop in areas with restricted operation. Then slightly wet mop: The mop should be slightly moistened with water or detergent first, by using a special cleaning winch to squeeze out the excess water from the mop, or you can spray water or detergent on the mop. Note that there must be no accumulation of water on the digital printing flooring. The digital printing flooring must be able to dry completely within 15-20 seconds after wiping. To remove stains: Spray a diluted neutral cleaner directly on the stain, then brush with a white or red nylon cleaning pad until the stain is removed, then wipe clean with water. Finally, use a multi-functional floor mopping machine. For areas with very heavy cleaning tasks, it is recommended to use a multi-functional mopping machine for cleaning, which can complete the scrubbing of the digital printing floor and collect the sewage in one cleaning step. Cleaning can be done with a brush and a cleaning pad. A beige/red cleaning pad is usually available. Electric or battery-powered mopping machines in different sizes, as well as mopping machines with brushes, are available.

Maintenance of Digital printing flooring

The maintenance of digital printing flooring is generally maintained after the digital printing flooring is laid or before use. First, the dust and debris on the surface of the digital printing flooring will be removed. Then use a mopping machine with 3M red abrasive disc or similar products to clean at low speed (diluted with a strong universal cleaner 1:20 and added to the mopping machine) to remove the protective wax, grease, dust and other dirt on the surface of digital printing flooring, suck up the sewage with a suction machine. Then rinse with clean water and dry. Finally, according to personal needs, apply 1-2 layers of high-strength facial wax. The daily maintenance of digital printing flooring is relatively simple, the first is to push the dust or vacuum the dust. (Put the mopping agent on the mop, and then push the dust after drying.) Then do the wet mopping. (Use digital printing flooring cleaning and polishing agent diluted with water at a ratio of 1:20, and mop the floor with a semi-wet mop.) If necessary, you can also use a floor scrubber with low-speed cleaning. The regular cleaning and maintenance of the digital printing floors to push the dust or vacuum the dust, then dilute the digital printing floor cleaning and polishing agent with water at a ratio of 1:20, and then mop the floor or cooperate with a high-speed polishing machine and a red abrasive disc for grinding. Then apply 1-2 layers of high-strength face wax. According to personal needs, it can be polished with a high-speed polishing machine and a white polishing pad. Then go for a complete refurbishment.

If you are interested in Digital printing flooring, you can contact us, our website is https://www.sentaifloor.cn/, you are welcome, and look forward to cooperating with you.