The difference between 3d nonpvc flooring and PVC flooring

3d nonpvc flooring and PVC flooring are different, think of PVC flooring, more think of plastic, many people will also confuse PVC flooring and PVC pipe, plastic contains toxic substances, harmful to the human body. But 3d nonpvc flooring and plastic are not at all the same thing, high quality 3d flooring does not contain formaldehyde, benzene, and other toxic substances, moreover, there is no radiation, belongs to the green environmental protection decoration materials, will not cause harm to the human body.

Here is the content:

l The degree of foot comfort is not - the same

l The installation process is different

l The indoor environment is different

l Paving flatness is not the same

The degree of foot comfort is not - the same

Thickness is different: the former thickness is only four millimeters; the latter thickness is only two millimeters.

3d nonpvc flooring production process and technical requirements are higher, usually the thickness of about 4MM, greater than the usual 2MM PVC self-adhesive flooring, and more comfortable footing.

The installation process is different

(1) 3d nonpvc flooring g relies on the locking link between the floor to complete the installation, laying easy, fast, the installation process without the use of glue. General workers can completely install more than 100 square feet per day.

(2) And PVC self-adhesive flooring installation is even easier and faster. The back of the floor comes with pressure-sensitive adhesive, as long as the protective film is torn off, it can be directly pasted to the ground up.

The indoor environment is different

(1) 3d nonpvc flooring structure is composed of PUR crystal shield transparent layer, pure PVC wear-resistant layer, rich color film layer, SPC polymer substrate layer, soft and silent rebound layer, etc. The substrate of flooring is made of mineral rock powder, then mixed with polymer resin, and then hot pressed at a high temperature to form a stable substrate layer. It can achieve the real 0 formaldehyde.

(2) PVC self-adhesive flooring raw material requirements are not as high as 3d nonpvc flooring, for some manufacturers who do not have strict enough control, the glue may contain a small amount of formaldehyde, and there will be a certain number of environmental hazards.

Paving flatness is not the same

(1) 3d nonpvc flooring hardness is high, and laying is not dependent on glue fixed to the ground. So, the flatness of the ground requirements is higher, if the ground is not flat, generally before paving to do self-leveling.

(2) and PVC self-adhesive flooring is relatively soft, the ground can be paved if there is a gentle level of undulation, but after paving, the floor with the original ground appears high and low undulation. This higher place is more likely to wear. At the same time, the ground is too rough and uneven or dusty and sandy ground, also easy to degum buckling.

We started to develop the wood finish of SPC/Non-PVC flooring (WS flooring for short) in 2o19. This flooring is not only topped with wood veneer, but also with SPC/Non-PVC core. Electricity is one of the major parts of the total cost of 3d flooring. With the advantages of solar panels, Anheuser-Sentec not only has top quality but also better price competitiveness.