Publish Time: 2022-10-05 Origin: Site
The wood floor plays many vital roles in our daily life, so what is the relevant information on a wood floor? Let's take a look next.
Here is the content list:
l Material
l Install
l Precautions
1. If consumers pay more attention to the stability of the wood floor, the wood floor made of disc beans and pineapple lattice is a good choice.
2. From the perspective of cost performance, the wood floor products made of Panlongan and Newton beans are extremely cost-effective.
3. In terms of consumption level, balsamic dal and vera wood are also commonly used materials for the manufacture of wood floors. They also exude fragrance and are often used in Chinese classical decoration.
4. Among the main groups of home decoration nowadays, wood floors made of ash, oak, and other materials are mostly used to meet the needs of popular decoration styles.
Buying wood floors should not only pay attention to the selection of materials, but also consider that the material of wood floors should be coordinated with the style of home decoration, and the wood floor material that can meet the needs of consumers is the best.
1. The wood floor cannot be purchased immediately. It should be unpacked and placed in the new house for some time before paving so that the wood floor can adapt to the new environment.
2. Don't think that the wood floor can't contain water. The wood floor will become very hard after leaving the water, and the feeling under your feet will be different. Therefore, it is necessary to keep the water content of the wood floor at about 14%. Of course, this is checked by professional tools.
3. A certain gap should be reserved between the wooden grille and the ground base (the elementary school textbooks taught us to know how to leave a gap) to ensure that the air inside the entire ground dragon is unobstructed. Do not use cement mortar to fix the wooden grille. The wooden grating shall be firmly fixed to the ground with nails using dunnage wedges.
4. Before laying the wood floor, the wooden grille should be cleaned and sprinkled with moisture-proof powder and insect-proof powder. This is to prevent bugs from eroding the material of the wood floor and destroying the structure of the wood floor.
5. The nails for nailing the wood floor must use twist nails, the first drill diagonally at the groove (the hole should be perpendicular to the length of the floor strip), and then nail it into the wood grille, otherwise the wood floor will easily be loosened during use.
6. After the wood floor is laid, cover it with cardboard, old sheets or old mats, etc. The purpose of this is to protect the original installation structure of the wood floor and strengthen its structure.
1. Substrate density and internal bonding strength. The higher the internal bonding strength, the better the ability of the floor to withstand the change of geothermal temperature, and the phenomenon such as cracking will not occur. According to the characteristics and requirements of geothermal, the base material of geothermal floor adopts relatively dense wood to ensure that the wood floor will not crack under high temperature for a long time not deformed;
2. The expansion rate of water absorption thickness. To be less than or equal to 2.5%, the smaller the water absorption thickness expansion rate, the better the moisture resistance of the wood floor;
3. The amount of formaldehyde released. Be sure to choose the lowest possible one, because the higher the temperature, the more formaldehyde will be released. In a relatively closed living room plus the release of other items (such as large core boards, etc.), the indoor formaldehyde may exceed the standard and cause harm to the human body.
4. Install the program. "Three points of floor, seven points of installation", laying geothermal floor requires special attention to the method, thus ensuring the safe use of the floor in the case of repeated temperature changes.
The above is the relevant information about the wood floor, if you are interested in wood veneer flooring, floor wooden for containers, and high-quality wood flooring, you can contact us, our website is https://www.sentaifloor.cn/.
Since 2019, we started to develop wood veneer with SPC/Non-PVC floor (abbreviation WS floor). This kind of floor not only has wood veneer as its top layer, but also has SPC/Non-PVC core as its base core.
Contact person:Simon ren
E-mail:simon@sentaigroup.com
Mobile phone / WhatsApp:+86 17730471120
Tel:0086-0563-6988013
Address:NO 23 North jianshe Road,Guangde County ,Anhui Province ,China 242200
If you want, we'll keep you updated on the latest news about products and events
Copyright © 2021 sentaifloor Co., Ltd. Support by Leadong.